Painting Wrought Iron Patio Furniture

Apply paint to the wrought iron.

Painting wrought iron patio furniture. Fill a bucket with warm water and then add detergent in the water. Rinse thoroughly to remove all chemicals. Then avoid touching the furniture again with your bare hands until you re done painting. How to refurbish wrought iron chairs remove any loose paint and surface rust.

Power wash your wrought iron furniture with a nozzle that delivers a concentrated water pattern. With denatured alcohol or acetone on a soft rag to remove any traces of oil. On any paint job the key to success is in the preparation and that s especially true of painting wrought iron. Sand all surfaces thoroughly.

Here is the correct way to refurbish wrought iron chairs the right way. This seals the rust so that it doesn t bleed through your pretty new paint. Learn how to clean and paint outdoor metal furniture and restore metal outdoor furniture by removing rust and chipped paint with a wire wheel. Then remove mildew with a bleach and water solution.

For best results use a direct to metal dtm paint that contains a rust inhibiting ingredient. For painting wrought iron use exterior grade enamel paint. Dip a towel and scrub wrought iron with cloth to remove dirt or debris. Using ordinary exterior paint will lead to chipping.

Slip on disposable gloves or use rags if you need to move the furniture. Instruction to paint wrought iron patio furniture. Use either the red nozzle which delivers a 0 degree spray pattern or the yellow one which delivers a 15 degree pattern. Then seal all the rust spots with rust reformer spray paint.

Do buy an ergonomic attachment. The time you spend scraping off the old paint and any rust will really pay off in. You need to make sure you give iron furniture or iron anything a light sanding before you put paint on it. A concentrated spray removes more paint and it can t harm the furniture.

You can use a sponge block sanding pad. Look for rust stains or scratches on the wrought iron.